ECRESO Dynamic RDS Option for FM Transmitter 100W-5000W
EcresoWC-CD00106
Please ask for estimated delivery time
489,00 EUR
Ecreso FM 3KW
Adds greater redundancy to compact transmitter range
The compact Ecreso FM transmitter range includes a direct to channel digital modulator into its 3U chassis and offers a wide range of on-board features in addition to its core structure of digital modulator, 6th generation MOSFET and up to 76% efficiency. These include a dynamic RDS encoder, stereo encoder, 5-band sound processor, MPX over AES, and GPIO support as well as Single Frequency Networking. With the launch of the Ecreso FM 3kW Transmitter, the power range of the compact system is extended to now reach from 100W up to 3kW.
However, the new Ecreso 3kW FM does not only add additional power but also built-in redundancy on the system’s power supplies, power amplifiers and fans as well as hot-swappable power supplies.
| Following Options are available on demand - you buy a standard transmitter or a complete system! Contact us for assistance! | |
| Ecreso Software Options | |
| CD01003 | SmartFM |
| CD00106 | Dynamic RDS |
| CD01001 | 5 Band Sound Processor |
| CD00162 | Communication Pack |
| Ecreso Hardware Options | |
| SP01319 | GPIO board |
| SP01615 | Analog GPIO board |
| ST01981 / ST01792 | SFN option |
| SP01260-AO | Internal surge protector |
| Extended Warranty | |
| EMR4 | 10 Year Warranty (100-300W) |
| EMR5 | 10 Year Warranty (750-2000W) |
| EMR6 | Expert Maintenance Reporting |
| On Demand Services | |
| Dummy loads, adapters, cables | |
| Cavity filters, combiners and antenna systems | |
| Coverage Study | |
| Turnkey solutions for broadcasting site | |
POWERFUL
PERFORMANCE
- Built-in active redundancy
- Digital modulator ”Direct to Channel”
- 5 Band Sound Processor
- MPX over AES compatibility
POWERFUL
CONTROL
- TCP/IP, SNMP management and email notifications
- Advanced Measurement Interface
- 24h graphical history log
- Expert Maintenance Reporting (EMR)
POWERFUL
SAVINGS
- Up to 76% efficiency + SmartFM
- Hot swappable power supplies
- Built-in functionality
- Increased life span
FEATURES
BUILT-IN REDUNDANCY*
- Up to 3 power supplies with load sharing
- Active redundancy RF amplification
- Passive coupler with maximum robustness
- Oversized coupling loads for unlimited operation on fault
- Intelligent design, maximum reliability and redundancy
* Figures given here may vary depending on the transmitter power level and version
DIGITAL EXCITER
- Digital FM modulator "direct to channel"
- Highest signal quality
- Perfect audio fidelity
- Several built-in broadcast tools
- 5 band sound processor
- Control of all signal parameters
ADVANCED CONTROL
- Advanced Measurement Interface (AMI)
- Expert Maintenance Reporting (EMR)
- Intuitive Web Interface
- Full SNMP Management
UP TO 76% EFFICIENCY
- 6th MOSFET generation and new planar design
- Reduced consumption and operational costs
- Reduced heat and cooling costs
- Hot swappable power supplies
- Reduced maintenance costs
5 BAND SOUND PROCESSOR
The Ecreso FM Transmitter range also features an integrated multi-band sound processor! This fully digital sound processor offers the highest signal quality and outstanding reliability as no additional hardware is required*.
You can choose from a wide-band or a multi-band version to achieve the level of processing required at your site and the processor is supplied with a full set of presets for many different formats and requirements.
- Hosted in direct to frequency Digital Modulator
- Highest quality processing from audio input to RF output
- Powerful DSP-based processing
- Complete 5-band architecture
- Factory presets for all formats
- Easy to fine tune through intuitive GUI
- Real-time meters at each stage
- No additional hardware:
maximum reliability, no maintenance.
Smart FM
Artificial intelligence for radio
SmartFM is a worldwide patented technology for FM transmitters which revolutionizes FM radio broadcasting and brings massive benefits to broadcasters, radios, and their audience of listeners.
ENHANCES THE LISTENING EXPERIENCE
for the most sensitive program content
Lowers energy costs by 10 to 40%
thanks to electricity savings and reduced cooling
REDUCES CO2 EMISSIONS
for a cleaner, more sustainable environment
ADDITIONAL FEATURES
Advanced Communication Pack
- Intuitive and secured Web Interface (TCP/IP)
- Advanced Measurement Interface
- Full SNMP Management
- Audio Backup on µSD card
Multiband Sound Processor
- DSP based 5-band or wide-band processing
- Presets for all applications and formats
- Intuitive GUI to fine tune your sonic signature
- Low distortion Final Limiter & MPX Power Limiter (ITU 412)
Dynamic RDS Encoder
- Supports PI, PS, TP, TA, MS, PTY, PTYN, DI, CT, AF, RT
- Dynamic PS Scrolling
- Pure and stable signal thanks to Digital Modulator
- Delivers Audemat’s expertise in RDS
Single Frequency Network
- 10 MHz input for RF carrier synchronization
- Adjustable program delay (on audio / MPX inputs)
GPIO Boards
- Digital GPIO Board : main alarm monitoring and control (RF off/on, Standby, Presets...)
- OR Analog GPIO Board : with analog output voltages (forward power, temperature...)
Scheduler
- Automatic change of preset
- RF Power scheduling and consumption saving
- Schedule any parameter of your ECRESO FM
Internal Surge Protector
- Powerful protection against lightning
- Visible status LED
- Easy to replace
Email Notifications
- Alarm sending by SMTP
- Easy configuration of each notification
- Same notifications can be sent by SNMP
MPX over AES
- Improved MPX signal quality
- No hardware change
- Compatible with MPX over IP APT codecs
Digital Stereo Encoder
- High speed DSP circuitry
- Subcarrier perfect synchronization
- Amazing signal quality
ECRESO OFFERS UP TO 10 YEARS' WARRANTY
WorldCast Systems offers a standard warranty of 3 years on all our FM transmitters and up to TEN YEARS' Warranty on our range of compact FM transmitters and new ECRESO FM 5kW/10kW for a small additional charge.
No other FM Transmitter Manufacturer even comes close to that commitment or confidence! We can offer the 10 Year Warranty with confidence thanks to:
- Our exceptional design quality
- The outstanding efficiency of our transmitters
- Advanced diagnostics capabilities
BE PROACTIVE WITH EXPERT MAINTENANCE REPORTING
EMR is a proactive service available on ECRESO FM Transmitters. It sends the user regular reports on the status of key parameters such as temperatures, currents and voltages, plus information on the performance and lifespan of components such as the fan and power supply of the transmitter.
With detailed logging and trend analysis, Expert Maintenance Reporting can identify slow-burning problems and issue warnings well in advance to allow for corrective action to be taken. A map-based display of current statuses and detailed, user-friendly reports and graphs can be accessed around the clock in the EMR user page.
CONNECT WITH WORLDCAST MANAGER
The WorldCast Manager simplifies the management of all SNMP-enabled devices in a network, providing real-time status, historical data and visualization of multiple devices from a single screen. The intuitive and simple-to-use interface shows all devices located at your site(s) displaying product information, alerting you to any alarms and providing one-click access to the unit’s web-based control interface.
The WorldCast Manager is compatible with all WorldCast Systems’ equipment as well as SNMP devices from ANY manufacturer.
SPECIFICATIONS
| ECRESO FM 3KW | |||||
|---|---|---|---|---|---|
| Frequency range | 87.5 to 108 MHz by 10 kHz steps | ||||
| Frequency stability | < 10-6 per year | ||||
| HF output | 7/8 Type, 50 Ω | ||||
| Power range | 0.3-3.3 kW | ||||
| Power setting | 0-3.5kW | ||||
| Power factor | > 0.95 | ||||
| VSWR | < 1.35, optimal performance: < 1.1 , protection : >1.5 | ||||
| Spurious and harmonic suppression | > 82 dBc | ||||
| Efficiency | up to 76% | ||||
| Voltage | 3 phase wye + neutral, 340-457 VAC or Single phase 184 VAC to 264 VAC, 47-63 Hz | ||||
| Analog input (LINE1) | 2 XLR connectors, balanced, >10 kΩ (600 Ω jumpers selectable), Software adjustable level (-18/+18 dBu range) | ||||
| AES Input (LINE2) | 1 XLR connector, balanced, >110 Ω, software adjustable level (-20 to 0dBFS range), AES 16,24,32 bits, up to 192 kHz | ||||
| 2 Composite (MPX/SCA/RDS) inputs | 2 BNC type, unbalanced, >5 kΩ, Software adjustable level (-18/+18 dBu range) | ||||
| Composite operation | |||||
| Bandwidth | > 40 Hz to 53 kHz @ 0.1 dB, > 20 Hz to 60 kHz @ 0.2 dB, > 60 kHz to 80 kHz @ 0.4 dB | ||||
| Intermodulation distortion | < 0.02% | ||||
| FM S/N ratio | > 80 dB RMS @ 75 kHz deviation | ||||
| AM noise | >55 dB, weighted/unweighted, sync/async, RMS/CCIR (20-20 000 Hz) | ||||
| Stereo operation | |||||
| Bandwidth | > 40 Hz to 53 kHz @ 0.1 dB, > 20 Hz to 60 kHz @ 0.2 dB, > 60 kHz to 80 kHz @ 0.4 dB | ||||
| 38 kHz discontinuance | > 50 dB | ||||
| Stereophonic crosstalk | > 50 dB | ||||
| Mono operation | |||||
| Bandwidth | > 40 Hz to 15 kHz @ 0.1 dB | ||||
| Out of band rejection | > 40 dB @ 19 kHz | ||||
| Preemphasis | 0 µs, 50 µs or 75 µs | ||||
| Environmental / Physical specifications | |||||
| Overall dimensions | 3U x 19” x 700mm | ||||
| Weight | Main unit: 30kg - PSU’s: 2.18/module | ||||
| Operating temperature | Nominal: 5°C to 45°C, Maximum: 0°C to 50°C | ||||
| Storage temperature | -20°C to +70°C , < 10 years | ||||
| Humidity | 5 - 95 % non-condensing relative humidity | ||||
| Altitude | Up to 3900 m | ||||
| Cooling | Customized external or internal air cooling configurations | ||||
| Marking | CE, FCC | ||||
| Standards | 2014 30 UE, 2014 53 UE, ETS 302 018 (EMC), ETS 300 384 (Radio), NF EN 60215 (Safety) | ||||
| Title | Type | Size | Download |
|---|---|---|---|
| ecreso_fm_3kw_2019_en.pdf | 3.07MB | Download |
Sale
ECRESO 5 Band Sound Processor Option for FM Transmitter 100W-5000W
EcresoWC-CD01001
Please ask for estimated delivery time
1.816,00 EUR
1.725,20 EUR
Customers who bought this product also bought
Sale
ECRESO FM 5kW Modular FM Transmitter
EcresoWC-TF01205-RT01
Please ask for estimated delivery time
43.573,00 EUR
41.394,35 EUR