The Microtech Gefell MT71S features original M7 capsule, fixed cardioid pattern, -10dB pad and bass roll-off switch. Transformerless output stage. Phantom powered, comes with deluxe wood case. Satin nickel finish.
The Microtech gefell MT 71 S studio condenser microphone, equipped with our reliable large-diaphragm capsule, features outstanding performance, high sensitivity, and improved signal-to-noise ratio. The MT 71 S guarantees particularly clean and colourless sound reproduction. It is well-suited for instrumental and vocal soloists in radio and television broadcasting and any other kind of accurate production. The pressure gradient transducer is a dual-capacitor design that uses a single brass back-plate and two large-diameter gold-plated plastic diaphragms.
The transformerless circuit design substitutes the previous transformer for a symmetrical output stage yielding a superb transient response combined with a high RFI rejection. The circuit technology also achieves a wider dynamic range by lowering the self-noise floor and increasing the headroom for loud signals. A 10 dB attenuator has been installed to reduce the sensitivity of the microphone when placed near very loud sound sources. A sensitivity reduction for low frequencies can be utilized to suppress the proximity effect.
- condenser microphone
- cardioid
- large diaphragm capsule
- PVC diaphragm
- transistor pre-amplifier
- phantom powering P48
product contents
| in wooden case 275 mm x 90 mm x 70 mm |
Optional Accessories:
- MH93.1S
- MKV9 stand adapter
- W76 windscreen
- EA21S locking shock mount
- AT8410a spring clip shock mount
technical data
| Polar pattern |
cardioid |
| Acoustic operating principle |
pressure gradient transducer |
| Frequency range |
20 Hz to 20.000 Hz |
| Sensitivity at 1 kHz |
13 mV/Pa ± 3 dB |
| Switch position "reduced bass roll-off" at 90 Hz |
-10 dB ± 1 dB |
| Output impedance |
150 Ohm |
| Noise level |
CCIR 468-4 |
22 dB |
| DIN EN 60268-4 |
14 dB-A |
| Signal-to-noise ratio |
CCIR weighted |
72 dB |
| A-weighted |
80 dB |
| SPL for THD 0,5 % |
134 dB |
| with 10 dB preattenuation |
144 dB |
| Dynamic range |
120 dB |
| Current consumption |
3 mA |
| Output connector |
|
XLR3M |
| Weight |
285 g |
| Length |
217 mm |
| Diameter |
capsule |
42 mm |
| preamplifier |
21 mm |
| Surface |
satin nickel |
frequency curves
MT 71 S cardioid

polar diagrams
MT 71 S cardioid
