Your shopping basket is empty
Sale
Panasonic AK-UCU600ESJ Camera Control Unit (LEMO connector model)

Panasonic AK-UCU600ESJ Camera Control Unit (LEMO connector model)

19,453 USD 20,477 USD

Choose your currency

Model/Product no.: PA-AK-UCU600ESJ
Stock status: Shipping within 10-21 working days
Piece

Panasonic AK-UCU600ESJ Camera Control Unit (LEMO connector model)

compatible for AK-PLV100 - AK-UC4000 - AK-UC3300 - AK-UC3000

Supports simultaneous UHD/HD output and high-speed*1 HD shooting.

The CCU supports not only UHD and HD simultaneous output, but also enables high-speed output*1 up to 240p in HD mode to be performed simultaneously with standard (1x) output, while still having a compact size.

  • Contains a dual UHD 12G-SDI system, and supports 3G-SDI quad link with quadrant or two-sample interleave.
  • Optical fiber transmission of uncompressed video signals over a distance of approx. 2,000 m between camera and CCU*2.
  • The compact, lightweight unit measures 2U in height and is rack-mountable.
  • Supports IP streaming (100 Base-T).
  • SD memory card can be used for saving user files and updating firmware versions.
  • Dual uncompressed12G-SDI output.
  • Supports TICO*3 over SDI (4K over 3G-SDI) output (4K signal can be transferred by a conventional 3G-SDI cable).
  • Supports 1080p/i and 720p. In addition to standard output, high-speed output*1 at 2x, 3x*4 or 4x*4 can be selected according to the specifications of the server.
  • Supports HDR/SDR simultaneous output and HDR BT.2020/BT.709 simultaneous output.
  • 12G-SDI output and TICO*3 over SDI (4K over 3G-SDI) output are compatible with the AK-UC3000.
  • *1: When in HD Hi-Speed mode
  • *2: When power is supplied from CCU.
  • *3: A codec developed by intoPIX. Stands for “Tiny Codec”.
  • *4: Only compatible with AK-UC4000.

Specifications

Power Supply AK-UCU600PJ/
AK-UCU600PSJ		 100 V - 120 V AC, 50 Hz/60 Hz
AK-UCU600EJ/
AK-UCU600ESJ		 100 V - 240 V AC, 50 Hz/60 Hz
Power Consumption 500 W (Without camera connected: 90 W)
Capacity for Supplying Power to a Camera 240 V AC (tolerance: 5 %), 1.46 A , 50 Hz / 60 Hz
Operating Temperature 0 ℃ to 40 ℃ (32 °F to 104 °F)
Operating Humidity 10 % to 90 % (no condensation)
Weight Approx. 8.9 kg (19.6 lb)
Dimensions (W x H x D) 424 mm x 88 mm x 401 mm (16-5/8 inches x 3-7/16 inches x 15-13/16 inches)
(excluding protrusions)
Video Output 3G/HD-SDI 5 lines (embedded audio is supported only for HD signals)
12G/6G/3G/HD-SDI 2 lines
HD-SDI 1 line (shared with picture monitor output*1)
Analog composite 2 lines (1 line shared with picture monitor output*1)
* For details on output formats, please see the "Supported formats".
HD TRUNK/TICO Output HD-SDI 1 line (HD TRUNK output)
3G/HD-SDI 1 line (TICO output)
Return Input 3G-HD/HD/SD-SDI 4 lines (RET1 input has active-through output)
Analog composite 1 line
Prompter Input HD-SDI 1 line (with active-through output)
Analog composite 2 lines (through output of 1 and input of 2 share the connector*1)
It is not terminated when the unit is turned OFF. No through output.
Reference Input BB (black burst) / tri-level*2: 1 line
(automatic termination, connect to upper connector; BB signal and tri-level signal automatically recognized, with loop-through output)
Microphone Output 0 dBm/600 Ω, 2 lines (XLR, 3-pin, male)
Communication Intercom input/output (ENG / PROD, 0 dBm, 600 Ω (4 W) /
1 V [p-p], 200 Ω (RTS), 4 W / RTS / CLRCOM) : 2 lines*1
PGM input (0 dBm/600 Ω) : 2 lines
Tally input (red, green, yellow) : 1 input each
AUX WFM control
6-bit (open collector output, terminal shared with camera microphone gain setting*1)
Camera microphone gain setting input
5-bit (photo-coupler input, terminal shared with WFM control*1)
Down-conversion system setting input 2-bit (photo-coupler input)
TRUNK RS-422 / RS-232C
2 lines*1
FRONT ROP RS-422
1 line, 16 V DC output (only one of this and REAR ROP can be selected at one time via the menu
or the [ROP FRONT/ REAR] selection switch on the front panel)
REAR ROP RS-422
1 line, 16 V DC output (only one of this and FRONT ROP can be selected at one time via the menu
or the [ROP FRONT/REAR] selection switch on the front panel)
MSU RS-422
1 line, GPI for control
LAN TRUNK LAN connection with camera side via an optical cable*3
1 line, 100BASE-TX, 1000BASE-T
LAN Personal computer connection for distribution via the Web*3
1 line, 10BASE-T, 100BASE-TX (use a crossover cable when connecting directly with a personal computer)
  • *1: Depending on the setting, only one of them can be selected at one time.
  • *2: The BB (black burst) signal and tri-level sync signal of the reference input are recognized automatically.
  • *3: IP video cannot be transmitted when [CCU MODE] is set to [2160/23.98p], [2160/23.98PsF], [1080/23.98p], or [1080/23.98PsF].
Title Type Size Download
Panasonic-Operating-Instructions-AK-UCU600P.pdf PDF 194.10KB Download

Product's tags

There are no tags registered.

Mine tags

Related products