Aqua Broadcast Cobalt C-3000 Digital FM Transmitter 3000 w with DDS Exciter, Stereo Enc, Analog Audio Inputs, AES/EBU, MPX, Dynamic RDS, 4RU-7/16 EIA
The COBALT C-5000 is a fully featured 3000W / 5kW FM Transmitter that has superior audio quality and sound clarity thanks to it‘s Direct to Channel Digital technology (DDS). Running on a Ifully customized LINUX OS system, this low distortion modulator is available on all models within the COBALT family of FM Transmitters. Inputs and outputs include Analog, AES/EBU, Digital MPX (AES192), Ethernet, USB, GPIO, GPS Sync with built in SFN capabilities.
Ideal for many Medium power Broadcast applications where High quality audio is needed.
COBALT Medium Power Transmitters have an industry standard 7/8” EIA output, ready to connect to your Transmission line.
Powered by 3 phase power, and protected by a breaker at the rear, its quick and easy to connect to a new or existing system. COBALT Medium Power Transmitters are designed for durability and reliability with features such as redundant fans and hot-swap power supplies. The compact design also includes easily accessible, washable air filters on the front panels of the power supplies.
An optional DC Input lets you run the COBALT C-3000 on a 48V DC power system and allows the telemetry and alarms functions to still be accessible in the event of a mains power failure that opens further possibilities for off-grid power options.
Radio market beating sound will let you stand out to your listeners, with its built-in 4 band Audio Processor with Bass enhancement, Pilot protection, Wide AGC and a whole bunch of expertly designed modern presets, so you sound great right from the start.
The modern design lets you easily read the Ultra-clear RGB display, and the intuitive Joystick controls with Haptic feedback and additional silicon buttons allows fast setup, getting you on the air even faster.
The advanced communication package with Intuitive web interface and remote control via Ethernet (https) lets you make changes or monitor the COBALT Transmitter. Full SNMP Version 3 management and the ability to send emails, alerts and monitor audio remotely gives you added confidence knowing you have full control from anywhere in the world on any device with a Web browser.
Easy access to all components and software controlled variable fan speed, will guarantee you low cost of maintenance. The highest AC efficiency, a compact design and reduced weight mean low cost of transportation and far the lowest total cost of ownership in its class.
Features:
- 4 Band Audio Processing
- Dynamic, UECP Compliant RDS Encoder
- Direct to Digital Synthesized modulation
- Digital MPX Encoder
- MPX Power Limiter
- Linux OS
- RGB Screen
- Ethernet Control and SNMP
- GPS Sync
- Optional Auxiliary DC power input
- Hot-Swap PSU
- High efficiency up to 76%
Available Options – please check related products for price:
- Cobalt Tuner Option
- Cobalt 5 band Audio Processor Option
- Cobalt Dante/AES67 Option
- Cobalt MicroMPX Option
- Cobalt 2U redundant PSU Option (C-300, C-700, C-1000)
- Cobalt 48V DC Power Option
- Cobalt 2U External Fan Option (C-300, C-700, C-1000)
GENERAL
Output Power (W) | 3000W / 3kW |
Range (W) | 3000W adjustable |
RF Output connector | 7/16” EIA, 50 ohm |
Input ACV | 1208/400Vac Three phases 47÷63 Hz |
Temperature controlled fan | 2 |
Power supplies | 3 |
Dimensions WxDxH (inch) | 19 x 24 x 4RU (7”) |
Dimensions WxDxH (cm) | 48.3 x 60.0 x 17.8 |
Weight | 38kg / 84lb |
MODULATOR
Transmitter type | Solid-state FM Stereo transmitter |
Modulator | Direct-to-channel (DDS) |
RF Output Frequency Range | VHF Band II, 87-108MHz |
RF Frequency Steps | 100kHz |
Frequency Stability | ±1 ppm or ±150Hz in 0-50⁰C range with internal 10MHz clock reference |
FM Modulation Range Capability | 75kHz default, 100% modulation user adjustable up to 105kHz 140%), maximum 300kHz |
RF
Power Stability | ≤ ± 0.25dB |
Asynchronous/AM noise | ≤ -60dB |
Synchronous AM s/n ratio | ≤ -60dB |
RF Harmonic and Spurious Suppression | Meets ETSI requirements |
VSWR operation | Fully protected against gradual or sudden VSWR conditions. Proportional power reduction from VSWR 1.5:1 |
STEREO ENCODER
Performance | 400Hz/1kHz test tones at modulation level ≤75kHz |
Modes | Stereo, Mono L+R, Mono L, Mono R |
Frequency response | 20Hz-15kHz ±0.02dB |
Pre-emphasis | 0, 50 or 75μs |
Pilot tone | 19kHz, adjustable level 0-12% |
Subcarriers suppression | ≤ -70dB |
Stereo separation | ≥75dB AES/EBU input, ≥70dB Analogue input |
Stereo SNR | ≥80dB with 75us de-emphasis, ≥75dB without de-emphasis, both inputs |
Stereo THD+N | <0.03% |
Crosstalk | ≥70dB, between L+R and L-R due to channel matching, both inputs |
MONO PERFORMANCE
Frequency response | 20Hz - 15kHz ±0.02dB |
Pre-emphasis | 0, 50 or 75 µs |
Mono SNR | ≥75dB AES/EBU input, ≥70dB Analogue input |
Mono THD+N | ≤0.002% analogue input, ≤0.001% AES input, with 75us de-emphasis |
ANALOGUE MPX INPUT PERFORMANCE
Frequency response | 10Hz-53kHz ±0.03dB, 53kHz-70kHz ±0.3dB |
FM SNR | 10Hz-53kHz ±0.03dB, 53kHz-70kHz ±0.3dB |
THD+N | ≤0.003% with 75us de-emphasis |
DIGITAL MPX INPUT PERFORMANCE
Frequency response | -90kHz ±0.005dB |
FM SNR | ≥100dB, with 75us de-emphasis |
THD+N | ≤0.001% with 75us de-emphasis |
AUDIO INPUTS
Analogue | 2 x XLR female, 10kΩ impedance, level adjustable 0-24dBu |
Digital | 24dBu AES/EBU via RJ45 per StudioHUB+, level adjustable -20-0dBFS, sampling rates 32-192 kHz |
AUDIO OUTPUT
Headphones Out | 1/4" (6.3mm) female stereo socket, software adjustable volume, minimum load impedance 16Ω |
WIDEBAND INPUTS
Analogue MPX | BNC, 10kΩ impedance, level adjustable 0-12dBu |
Digital MPX | AES/EBU via RJ45 per StudioHUB+, level -20-0dBFS, sampling rate 192kHz left channel |
Analogue RDS | BNC, 10kΩ impedance, level adjustable from 0.1-10Vpp |
WIDEBAND INPUTS
Analogue MPX | BNC, 10kΩ impedance, level adjustable 0-12dBu |
Digital MPX | BNC, 10kΩ impedance, level adjustable 0-12dBu |
RDS GENERATOR
Type | Fully Dynamic RDS/RDS2/RBDS Generator |
Protocols | ASCII commands, UECP protocol and X-Command Multi-port architecture |
Ports |
UART over USB-B & Ethernet |
COMMUNICATION AND CONTROL
10MHz input | BNC, 50Ω terminated |
1PPS input | BNC, 50Ω terminated |
RF sample output | SMA, 50Ω, -30dBc |
UART over USB | USB-B, system control |
USB | 2 x USB-A, storage & FW upgrade |
Ethernet | 1 x RJ45 |
RS232 | DB25 shared connector, system control |
GPIO | DB25 shared connector, 8 x output & 8 x input, all optically isolated. |
Interlock/RF Mute | DB25 shared connector, programmable logic/polarity |
Analogue voltage output | DB25 shared connector, 4-channel 0-5V range |
ENVIRONMENTAL
Altitude | 15,000 ft / 4,420m AMSL |
Temperature range | 0 to +45ºC working. -10 to +50ºC storage |
Humidity | 95% @ 35ºC, non-condensing |
Title | Type | Size | Download |
---|---|---|---|
Aqua-Broadcast-COBALT-C-3000-Datasheet-130123.pdf | 1.17MB | Download |