JK Audio RemoteAmp
Stereo Headphone Amplifier
Cuts through the Crowd Noise.
The RemoteAmp is a simple battery-powered personal headphone amplifier. Use the RemoteAmp as an IFB earpiece or headphone amplifier, or as an on-stage monitor headphone amplifier. This low-distortion, ½ watt amplifier will cut through the crowd noise without distortion.
Features:
- Compatible with TW (two-wire) party-line intercoms (listen-only)
- XLR line level input
- 1/8" (3.5mm) stereo line input jack
- 1 master level control
- 1/4" stereo headphone jack
- 1/8" (3-mm) stereo headphone jack
- Stainless steelt belt clip
- >20 hours on one 9V battery
- Made in America
- Approved for sale in Europe and Australia
Volume Under Control
The RemoteAmp clips to your belt and accepts a 3-pin XLR audio input from a mixer, distribution amplifier, telephone line hybrid, or a handset interface like our QuickTap IFB. You’ll like the convenience features, such as the separate power switch, which allows you to leave the volume control set at a comfortable level.
Stereo Line Input Jack
New to RemoteAmp is a low impedance 3.5mm TRS Stereo Line Input, designed to mix the headphone output of any device into your program feed. This input remains in stereo all the way through to the headphone outputs.
| Specifications | ||
| Line Input | Female XLR | 1/8" (3.5mm) Line In |
| Impedance | 4k ohms | 50 ohms |
| Level | 100 mV RMS (-18 dBu nom, +4 dBu max) |
-10 dBu, +12 dBu max |
| Max Gain | 46 dB | N/A |
| Headphones | 1/4" Stereo | 1/8" (3.5mm) Stereo |
| Impedance | 8 ohms | 10 ohms |
| Level | 500 mW per channel | 430 mW per channel |
| Misc | ||
| Stereo Separation | 46 dB | |
| Frequency Response | 50 Hz - 20 kHz ± 1 dB | |
| Power | One 9 volt Alkaline Battery | |
| Size | 5.1" x 2.7" x 1.3" (13 x 6.9 x 3.3 cm) | |
| Weight | 10 oz. (275 g) | |
| Title | Type | Size | Download |
|---|---|---|---|
| JK-Audio-RemoteAmp-Datasheet.pdf | 108.66KB | Download |
