D&R TELEPHONE HYBRID-1
the passive one line connection, to the best stories ever
The D&R Telephone Hybrid-1 is an interface between a standard telephone line and a mixing console.
Its purpose is to enable to record or broadcast a conversation between a caller and a presenter
in an easy way.
Superb audio separation between in and outgoing signals are achieved by carefully designed
internal circuitry.
It is a problem solver for changing two wire communication into a four wire system with separate in and outputs.
With its Private "TO CALLER" button you can easily temporarily disconnect the caller from the mixer (broadcast) for private conversations.
features
- Passive balancing interface
- Output: Mic level –20dBu, balanced
- Input level: line level 0dBu balanced
- R/C balance: fully adjustable
- Separation: more than 30dB
front side
C-BALANCE :
Potentio switch to select the optimum side tone attenuation.
R-BALANCE :
Internal potentiometer to adjust for optimum side tone attenuation.
CONNECT :
Connect calls to the mixer and disconnect calls from the telephone line. (without interrupting the phone line connection)
back side
PHONE :
RJ-11 connector to connect with a handset.
LINE (wall) :
RJ-11 connector to connect with the public telephone network.
TO MIC INPUT :
Stereo jack output to be connected to Mic input of the mixer.
TO CLEANFEED OUTPUT :
Stereo jack input to be connected to a Mix Minus/Clean feed (N-1) output of the mixer.
did you know...
that if you need a dual Hybrid in 19" rack format, you can use our
mounting kit to combine two
9.5"units into one dual Hybrid
that easily fits into a 19" rack.
Mounting kit for mounting two 9,5"
signal processors fitting in a 19"
rack.
specs
TO CLEAN FEED OUTPUT
Impedance : 10k Ohm, electronically balanced
Common mode rejection : >30dB
Maximum input level : +26dBu
Nominal input level : +4 dBu
Frequency response : 20Hz – 15kHz
Connectors : STEREO JACK
TO MIC INPUT
Impedance : < 50 Ohm, electronically balanced
Common mode rejection : >30dB
Maximum output level : -20dBu
Nominal output level : -30dBu
Bandwidth to telephone line : 250Hz – 4kHz, -3dB ref 1 kHz
Telephone line impedance : Nominally 600 ohm
Telephone line impedance range : 300 ohm to 1500 ohm
Connectors : STEREO JACK
GENERAL
Distortion : Less than 0.1% (0 dBu out)
Power supply : none (passive)
Power consumption : none
Shipping dimensions : 31x26x10cm
Weight: 1,4kg
EAN CODE:7436917139152
